SPC Floor 2186

Product Specification:

Name: Click Lock SPC Flooring

Surface texture:Marble grain

Size( W x L): 12" x 24" 

Total thickness: 3.5mm,4.0mm,5.0mm,5.5mm,6.0mm

Wear layer thickness: 0.3mm/0.5mm/0.7mm

Surface treatment: UV coated

Surface texture: embossed/ hand scratched/ wood grain/ marble grain

Click: Unilin click patented

Installation: Unilin click lock, no need adhesive

Material: 100% virgin vinyl

Core: virgin PVC

Usage: indoor

Lifespan: 15 years

Product Features & Advantages

1. 100% waterproof: vinyl material,hydrophobic, 100% waterproof and dampproof.

2. ECO-friendly: zero formaldehyde,no noxious or chemical.

3. Anti-slip: special slip resistance treatment on wear layer,take care of you and your children.

4. Fire resistance: reaction to fire classfication in Bf1-s1, second only to stone material.

5. Sound barrier: around 20db,noise hardly caused while walking on the flooring,especiall the floor adding IXPE backing layer.

6. Anti-bacterial: most germ and bacterium can not survive.

7. Durable: high quality wear layer and UV coating surface, more than 10 years service life.

8. Easy installation and less maintenance: no need accessory for installation,no need special maintenance.

Product structure:

Installation:

Real Project Cases:

Installation:

1.The four sides need to leave a seam less than 1/4 inch to adapt the expansion coefficient of plastic flooring, especially the short sides

2.Installation work should start until 48 hours later when the flooring arrive at the installation site. The flooring should adapt the environment and the temperature.

3.The best constant temperature for installation should be 18ºC~25ºC.

4. Layout pattern as the below pictue

This diagram shows the best process for laying a vinyl floor. Moving from right to left, the last piece in each row will always be cut off, with the cut-off piece from the left shifting down to begin the next row of flooring on the right. 

5. Stagger the planks

The rows of vinyl planks should have a staggered, saw tooth appearance so that seams never line up in adjacent rows. Not only would this be unsightly but it would also compromise the structural stability of the flooring.