ASA-PVC Wall Cladding

ASA-PVC Co-extrusion products, also known as polymer modified materials, adopt multi-layer composite one-time forming technology, and do not use any toxic adhesive between the protective layer and the core. The surface of the profile is covered with a dense and evenly distributed polymer protective layer, and the core material is composed of wood powder, modified PVC and other additives.

Details of ASA-PVC Wall Cladding

We also offer you other high quality interior wall panel series, please click here.

Advantages of ASA-PVC Wall Cladding

1. Completely eco-friendly and 100% recyclable.

2. Waterproof, moisture-proof, moth-proof and mildew-proof. High temperature and UV resistance.

3. High strength, small wear, no expansion, no deformation, no cracking.

4. The profiles are standardized, and the installation can be completed with only some cutting and necessary accessories, without further processing, shortening the construction period and improving labor efficiency.

5. The service life is about 25 years long, no special maintenance is required, and a lot of unnecessary maintenance costs are saved.

Great wall panel, corrugated ASA-PVC wall panel

Plug-in ASA-PVC co-extrusion wall panel

You can contact us for free samples before ordering, so you can order with more peace of mind!

Installation effect

We also offer a variety of other flooring, wall panels and custom services, you can click here to learn more about our products.

How to install ASA-PVC Wall Cladding

The order of ASA-PVC Wall Cladding installation: first the top wall, the first board and the back line, from bottom to top, from the outside to the inside.

1. First, the rear wall refers to the installation of the ceiling and then the installation of the wall. When installing the ceiling, you need to fix the keel first. Install the front wall of the wall. The integrated wall surface must be fastened to the wall with a buckle.

After each installation, one side is fastened to the front integrated wall and the other side is fixed with steel nails. . Pay attention to the overall screen design when installing, you need to divide the grid first, and install according to the pre-designed drawings. If you encounter the socket position, you need to leave the socket in advance.

2. The first board and the back line refer to the installation of the main board first, then install the lines, first install in a large area, and then process the corners, the edges and other details. If you encounter a column, you can use the back slot to wrap the column.

3. From the bottom up, when installing the ASA-PVC Wall Cladding, you need to start from the bottom of the wall and gradually increase it until you install a complete wall.

4. From the outside to the inside refers to the installation from the wall of the room into the door. This is because the installation to the rear part requires cutting, and the installation from the outside to the inside is more beautiful.

On the whole, the ASA-PVC Wall Cladding installation is very convenient and can be directly installed on the wall of the rough room, which can be completed by two woodworkers. If the wall is not flat, you need to level the wall before installation.