3D Wall Panel

PROJECTS:

How to install PVC Panels

Bamboo wood fiber integrated wall panel decorative line installation instructions:
The order of bamboo and wood fiber integrated wall installation: first the top wall, the first board and the back line, from bottom

to top, from the outside to the inside.

1. First, the rear wall refers to the installation of the ceiling and then the installation of the wall. When installing the ceiling, you

need to fix the keel first. Install the front wall of the wall. The integrated wall surface must be fastened to the wall with a buckle.

After each installation, one side is fastened to the front integrated wall and the other side is fixed with steel nails. . Pay attention

to the overall screen design when installing, you need to divide the grid first, and install according to the pre-designed drawings.

 If you encounter the socket position, you need to leave the socket in advance.

2. The first board and the back line refer to the installation of the main board first, then install the lines, first install in a large area,

 and then process the corners, the edges and other details. If you encounter a column, you can use the back slot to wrap the

 column.

3. From the bottom up, when installing the wall, you need to start from the bottom of the wall and gradually increase it until you

install a complete wall.

4. From the outside to the inside refers to the installation from the wall of the room into the door. This is because the installation

to the rear part requires cutting, and the installation from the outside to the inside is more beautiful.

On the whole, the integrated wall installation is very convenient and can be directly installed on the wall of the rough room,

which can be completed by two woodworkers. If the wall is not flat, you need to level the wall before installation.